Shipping protection
Shipping protection
💨 Compressor-Powered Suction
🔧 3 Cups for Different Dent Sizes
🏠 Pull Shallow Dents at Home
Couldn't load pickup availability
The body shop quoted me almost $400 for a shallow dent in my passenger door. It took a few controlled pulls, but the panel looks much better now. Definitely glad I tried this first.
The tool feels heavier and better built than the cheap suction pullers I've used before. Connected to my compressor without much trouble and held onto the door panel well.
Someone left a dent in my rear door at the grocery store. I used the medium cup and worked it slowly. It didn't take long, and you have to look closely to notice where the dent was.
How It Works
How It Works
The Aerovex™ Pneumatic Dent Puller connects to a standard air compressor and uses pneumatic suction to grip the panel far more firmly than a basic manual cup. Clean and dry the panel, fit the cup size that best matches the dent, connect your air line, and use the built-in slide weight to make light, controlled pulls. Check the panel between pulls and stop as soon as the surface sits level.
Compressor & Dent Requirements
Compressor & Dent Requirements
Aerovex™ requires a working air compressor with a standard quick-connect air line. Check the included manual for the recommended operating pressure before your first pull.
It is designed for shallow dents and door dings with fully intact paint on flat or gently curved steel panels. Do not use it on sharp creases, cracked or chipped paint, rusted areas, panel edges, plastic bumpers, or collision damage. If the paint is broken or the dent is deep, have the panel evaluated by a professional body shop instead.
What's Included?
What's Included?
- 1x Aerovex™ Pneumatic Dent Puller with built-in slide weight
- Interchangeable suction cups in multiple sizes
- Quick-connect compressor fitting
- User manual
- Storage case or accessory box, where included in the selected supplier package
Key features:
Strong compressor-driven suction
Multiple cup sizes for different dents
Solid metal construction
Works with standard home air compressors
Reusable for future door dings
30-Day Guarantee
30-Day Guarantee
We stand behind the Aerovex™ Pneumatic Dent Puller.
If you are not satisfied within 30 days, contact us for assistance under our 30-day money-back guarantee.
Please review the store return policy for eligibility, item-condition requirements, and return instructions.
Shipping & Return Policy
Shipping & Return Policy
Aerovex™ orders are prepared according to the processing and delivery estimates shown at checkout. Every purchase is backed by our 30-day money-back guarantee. Please review the store shipping and return policies for current delivery timelines, eligible return conditions, and complete instructions.
Why Car Owners Choose Aerovex™
-
★★★★★
Read The Instructions First
The first cup I tried was too small, so it wouldn't hold properly. Once I switched sizes and cleaned the panel, the suction was much stronger. Take your time and don't over-pull it.
-
★★★★★
Saved Me A Body-Shop Trip
I already owned a small air compressor, so setup was simple. The dent was shallow with no paint damage, and this pulled most of it out in my driveway.
-
★★★★★
Better Than The Handheld Cups
I've tried one of those basic manual suction cups before, and it kept slipping. The pneumatic grip on this stayed attached much better while I used the slide weight.
Pull Shallow Dents At Home—Before Paying A Body-Shop Quote
Minor door dings can cost hundreds at a body shop. The Aerovex™ Pneumatic Dent Puller uses compressor-driven suction and a slide weight so you can work a shallow dent out in your own driveway, with the paint left untouched.
Pneumatic Grip That Holds While You Pull
Basic manual suction cups slip and pop off mid-pull. Aerovex™ locks onto clean, intact paint using air-powered suction from your compressor, so the cup stays planted while the built-in slide weight does the work. Interchangeable cup sizes let you match the tool to the dent, from small parking-lot dings to wider shallow dents.
Clean The Panel, Fit The Cup & Pull With Control
Confirm the dent is shallow with intact paint, clean and dry the panel, fit the cup size that matches the dent, and connect your air line. Make several light, controlled pulls, checking the panel between each one, and stop as soon as the surface sits level—over-pulling can raise the metal. Avoid sharp creases, cracked paint, panel edges, and any dent you are unsure about.
Frequently Asked Questions
Do I need an air compressor?
Do I need an air compressor?
Yes. The Aerovex™ Pneumatic Dent Puller is powered by air pressure and requires a working compressor with a standard quick-connect air line. Most small home and garage compressors are suitable—check the included manual for the recommended operating pressure before use.
What kinds of dents can it fix?
What kinds of dents can it fix?
Aerovex™ is designed for shallow dents and door dings with fully intact paint on flat or gently curved steel panels. It is not intended for sharp creases, cracked or chipped paint, rusted areas, panel edges, plastic bumpers, or collision damage. Deep or complex dents should be evaluated by a professional body shop.
Will it damage my paint?
Will it damage my paint?
The suction cup is designed to grip clean, intact paint without adhesives. Always clean and dry the panel first, use the correct cup size, and make light, controlled pulls. Do not use the tool on paint that is already cracked, chipped, or peeling, and stop immediately if the finish shows any sign of stress.
What if the dent doesn't come out on the first pull?
What if the dent doesn't come out on the first pull?
That is normal for many dents. Make several lighter pulls instead of one hard pull, and check the panel between attempts. If the cup slips, try a different cup size or re-clean the surface. Some dents will improve significantly without disappearing completely, and stubborn or deep dents may still require professional repair.
The Simple Aerovex™ Dent Pull Routine
A controlled, step-by-step repair routine designed for shallow dents and door dings—not collision damage.
Three Controlled Steps
89%
Clean and dry the panel, and confirm the dent is shallow with intact paint.
99%
Fit the correct cup size and connect the puller to your air compressor.
100%
Make light, controlled pulls with the slide weight and check the panel between pulls.